Genie Chain Glide/Chain Drive Gear

Description

Genie Chain Glide/Chain Drive Gear (Compatible with all Overhead Python and Python II, Chain Drive and Chain Glide in the Pro Max and the Genie products). Our gear is made much stronger that the original, which was notorious to crack and split. This gear has been discontinued by Genie, so we made our own stronger and longer lasting. *Now includes a tube of Super Lube Teflon grease with each gear*
To check to see if you gear is cracked you will need a 1/4′ socket to take the cover off of the motor head. Then there will be 3 other 1/4′ hex head screws holding the gear in place. Be sure to inspect the gear housing cover, these are bad for cracking too. Take the cover off and inspect the gear to see if it is split. If you have a busted gear, replace with the new one and add grease to the worm gear. Then you will reassemble in the reverse order.